APPENDIX B | NorandR Utilities Program |
These error codes apply when COMM SETTINGS is set to
NOVELL NETWARE:
"“0” No error
“6” User aborted communications by pressing
“100” Connection to host failed. Verify network connection, verify that PENKEY login name exists on host.
“101” Could not access include file. Verify existence of include file on host.
“102” Could not allocate needed memory.
These error codes apply when COMM SETTINGS is set to
NRINET:
"“0” No error
“6” User aborted communications by pressing
“800” PC TCP/IP kernel is missing.
“801” Invalid client IP address. Make sure the entry for CLIENT IP ADDRESS is correct, or make sure the DHCP server is running.
“802” Invalid Service or Service Type, or invalid port number.
“803” Invalid host name or IP Address. Make sure the entry for SERVER NAME is correct, and that the server is running.
“804” Could not create socket. Check all cables and network connections.
“806” Block sent was incomplete or block received was incomplete.
“807” Client and server negotiation failed.
“808” Server specified an unsupported block size. “809” Invalid buffer pointer.
“810” All server connections are already in use. Try again later.
6400
