Intermec 6400 manual Option 3 Unit ID, Option 4 Network Parameters

NorandR Utilities Program APPENDIX B

Option 3 UNIT ID

If you select this option, the Change Unit ID pop-up menu appears:

UNIT ID 2233233

WORKGROUP 6200IPL

Enter up to eight characters to change the Unit ID. Use the [μSP] key to backspace and use the [CLR] to restore the previous ID. Press the [ENT] key to save the new ID and return to the Communications Settings menu. Press the [F4] key to reset the ID to factory default. Press [-]to exit this pop-up menu.

Option 4 NETWORK PARAMETERS

Network Parameters appears as Option 4 when Option 2. COMM SETTINGS is set to one of these three NETWORK options: NRINET, TFTP, or NOVELL NETWARE.

B-186400 Hand-Held Computer User’s Guide