Intermec 6400 manual Protocol Options, Host View Size

Terminal Emulation Menu Screens SECTION 3

Protocol Options

Use this selection to designate the hand-held computer type of the host computer. You can also designate which addi- tional commands and command sets are available.

The Protocol Opts menu has seven submenus to customize your hand-held computer. The Protocol Opts menu is shown on the next page.

		Protocol Opts
	1)	Host View Sze
	2)	Data Stream
	3)	Extended Cmds
	4)	5250
	5)	3270
6400 WTP only,	6)	VT/ANSI
	7)	Native
blank if TCP/IP

Host View Size

The Host View Size option tells the hand-held computer the format of display information sent from the host. The dis- play viewing size equals 1920 (determined by taking the number of rows times the number of columns). The excep- tion is with 5250 Terminal Emulation which can have an additional row for error messages and therefore can have 2000 characters instead of 1920.

The default setting for 6400 WTP using Native Terminal Emulation is 120 columns by 16 rows (equals 1920). The default for VT220 Terminal Emulation is 80 columns by 24 rows (equals 1920). The default for 5250 Terminal Emula- tion is 80 columns by 24 rows (25 with error messages).

The default for 3270 Terminal Emulation depends on what the original setting was before you changed to 3270 Termi- nal Emulation. Remember that the total characters must equal 1920 (number of rows by the number of columns) un- less using 5250 Terminal Emulation with error messages.

3-266400 Hand-Held Computer User’s Guide