NorandR Utilities Program | APPENDIX B |
“138” Command not valid to cancel
These error codes apply when COMM SETTINGS is set to MODEM/DIRECT and PROTOCOL is set to TTY:
“0” | No error |
“6” | |
“11” | Invalid parameter specified in control file |
“23” | End of transmission |
“101” | Line lost |
“102” | Parity error |
“103” | Character gap too long |
“104” | Data loss |
“105” | Excessive NAKs (no acknowledgements) |
“106” | Block count error |
“107” | Block check error |
“108” | Block framing error |
“109” | Control character error |
“2xx” | Modem error |
“xx” Hayes response code, or code defined by program:
“86” Error sending command to modem
Expected numeric response not numeric
Invalid response format
No significant response from modem
COM port disabled by system due to low battery or removal of PC card modem.
Unrecognized English response Memory allocation error
