
SECTION 3 | Terminal Emulation Menu Screens |
Scan Options
Use the Scan Options menu to designate how the
Scan Options
1)Redundancy
2)MOD 10 Check
3)Concatenate
4)BC Type Char
5)Stream Scan
6)Scan All Flds
7)More
Redundancy: This option requires two identical scans of a bar code, one right after another, before the
Mod 10 Check: When you select this option, a check digit is added at the end of the bar code after a good read. This is a variation of the modulus 10 formula and is used infre- quently.
For additional information on Mod10, refer to the book PEN*KEYR 6400 Programmers Reference Guide p/n:
Concatenate: Each bar code read is added to the end of the previous bar code read until the computer meets a condition that forces transmission to the host.
When this option is OFF, each bar code read is placed at the beginning of the current input field. After a bar code is placed in a field, any subsequent read replaces the first read.
BC Type Char: This option adds a character associated with the bar code type at the beginning of the scanned bar code.
Stream Scan: If the scanned bar code is too big for the input field, the overflow information appears in the next field. This continues until the entire bar code is entered.
6400