Intermec 6400 manual Set All Defaults

SECTION 2 Operation

Setting Your DOS Application to Accept Tethered Laser Scanners

In AUTOEXEC.BAT, ensure the scanner driver is loaded in the PS/DOS section with 64SCN7B --E --W --T1 I0 (this is for wedge scanning).

Setting Up Your LS3203 or LS3603 RS-232 Serial Scanner Parameters

Tethered laser power is always on, so a tethered laser can scan, decode, and send the data as soon as it is connected, even when it is not properly configured. Therefore, proper operation of the tethered laser is no indication that the la- ser is correctly configured for the scanner driver 64SCN7B.

Scan the following bar codes to set up your LS3203ER- I200A or LS3603-I200A scanner so it will work with your hand-held computer. You need to scan all the bar codes (ex- cept for the Host Transmit Code ID Character and Host De- code Options) to enable your laser scanner to work with the 64SCN7B scanner driver on your computer.

Set All Defaults

Scan the Set All Defaults bar code to set up your scanner for RS-232 serial communication.

6400 Hand-Held Computer User’s Guide 2-21