APPENDIX B | NorandR Utilities Program |
The three digit number (“289”) indicates the specific proto- col error. These error codes apply when COMM SETTINGS is set to NPCP
"“0” No error
“1” MININET.EXE not installed
“6” User aborted communications by pressing
“11” Invalid parameter specified in control file
"NOTE: The following values indicate an error returned by MININET.EXE. 100 is added to the error returned by MININET.EXE to avoid conflict with other defined errors.
“101” Illegal buffer length “103” Invalid command “105” Command timed out “106” Message incomplete “108” Illegal local session number “109” No resource available “110” Session closed
“111” Command canceled
“113” Duplicate name in local name table “114” Name table is full
“115” Name is deregistered, command complete “117” Local session table full
“118” Session open rejected “119” Invalid name number “120” No answer
“121” Name not found
“122” Name in use on remote adapter “123” Name deleted
“124” Session ended abnormally “125” Name conflict
“126” Incompatible remote device “133” Network interface is busy “134” Too many commands outstanding “135” Invalid LAN adapter number
“136” Command completed while cancel occurring
