JVC 250 Electronic Section, Relay Lens Assemblies, Front Projection Lens, Input Cards VICs

Chapter 2---System Description

Relay Lens Assemblies (3)

There are three Relay Lenses, one for each color. The Relay Lens focuses the image light from the CRT onto the photosensitive layer on the input side of the ILA® . The Relay Lens is physically connected to the CRT (see Figure 2-2).

Front Projection Lens

The Model 250 comes with a choice of four standard lenses. These include a motorized Zoom Lens or one of three Fixed Lenses. All Projection Lenses have motorized focus.

!Motorized Zoom 2:1-4:1

!Fixed Lens

"0.96

"1.5:1

"5.6:1

2.4Electronic Section

The electronics section consists of the Input Cards (VICs), the Printed Circuit Boards (PCBs), and the CRT/Yoke assemblies.

Input Cards (VICs)

There are two standard Input Cards and four optional VICs. The Input Cards are the first stop for the source input signal. They provide the RGB and Sync interface for the projector. All VICs are IIC controlled.

Standard VICs:

!Standard RGBHV VIC - The RGBHV VIC is a straight feed-through with an IIC selection control.

!Graphic Enhancer Plus VIC - The Graphics Enhancer Plus VIC is exactly the same as the RGBHV VIC except for a Menu controlled adjustment for black on white graphics and text display

Optional VICs:

!YPbPr VIC - Composite Video Decoding for YPbPr

!Quad Standard Decoder VIC - Composite Video Decoding (NTSC, SECAM, and PAL)

!Quad Standard Decoder and Line Doubler VIC - Composite Video Decoding (NTSC, SECAM, and PAL) with Line Doubling

!Four-Input RGBHV - Four- Input RGBHV with IIC controlled Mux (switcher)

Model 250 Service Manual 2-5