JVC 250 service manual Exporting, Windows TERMINAL Transfers + Receive Text File

Chapter 8---Software and Protocol

Exporting

1.Make sure the Windows TERMINAL program is configured for SOFTWARE FLOW CONTROL (XON/XOFF). A corrupt Export file will result if SW flow control is not used.

2.Choose the directory and filename for saving the Export Data. The Windows TERMINAL: Transfers: Receive Text File... dialog box will default to the c:\windows directory and no file. Create a directory (like \TEMP) (or have an existing one in mind) before starting the export process.

3.Model 250 Menu: 7. System + 5. Maintenance + 5. Export

=================================

	Export Configuration
Start RECEIVE TEXT Download
to Host on Serial PORT A
	<ENTER> to Continue
	< ESC> to Cancel

=================================

4.Windows TERMINAL: Transfers + Receive Text File....

5.Directories - set directory to desired download directory (C:\TEMP)

6.File Name: - Type desired File Name (for example: export1.txt)

7.Select OK with mouse or press Enter key (dialog will be removed)

8.Verify TERMINAL screen shows status line at bottom:

Stop, Pause, Bytes: 0, Receiving: EXPORT1.TXT

9.Model 250 Menu:

Press ENTER key to start export download. NOTE: Some VT100 Emulator programs (ProComm) will send the ENTER automatically when step 4.3 above is performed. Expect 10 minutes to export 20 sources (500,000 bytes) at 9600 baud).

Data Transfer will begin and continue until all source, channel, channel- source combination, and system data has been exported. The following dialog is displayed on the projector screen during the transfer.

=================================

	Export		Configuration
	EXPORT	IN	PROGRESS ... wait
- Press		ESC to Abort

=================================

The following message is sent at the end of the export data.

##########################

# Export Complete		#
#	STOP Host Download Now #
#	Then, Press ESC	#

##########################

8-6 Model 250 Service Manual