Lincoln Electric SVM172-A BB-5, Output Controls, Dual Procedure / Dual Head Select W/MEMORY Panel

BB-5	OPERATION	BB-5
3. OUTPUT CONTROLS		FIGURE BB.2

Return to Section TOC

Return to Section TOC

Return to Section TOC

Return to Section TOC

Return to Master TOC

Return to Master TOC

Return to Master TOC

Return to Master TOC

•The Power Feed 10M Dual Wire Feeder has 2 encoder knobs to adjust weld parameters.

•Each encoder changes the displayed value of the meter located directly above that encoder.

•In CC-GTAW modes when equipped with a foot or hand amptrol, the left encoder sets the maximum welding current. Full depression of a foot or hand amptrol results in the preset level of current.

•In CC-Stick and CC-GTAW, the right encoder acti- vates and de-activates the output. Turning the encoder clockwise enables the output. To de-ener- gize the output, turn the encoder counter-clockwise. The display above will indicate the "ON" or "OFF" status of the output.

4.DUAL PROCEDURE / DUAL HEAD SELECT W/MEMORY PANEL

(See Mode Select Panel Section for a Functional Description and detailed explanation)

This panel is intended for dual head applications, and is essentially the same as the Dual Procedure with Memory panel except for the addition of a second pro- cedure select push button. It contains two procedure select buttons, one for each head, and six memory (storage) buttons.

In general terms, dual procedure and memory are essentially independent storage locations for informa- tion.

5. MODE SELECT PANEL 4 (MSP4)

OVERVIEW:

The MSP4 is the standard mode select panel for the Power Feed 10M Dual Wire Feeder wire feeders. The MSP4 is capable of:

-Weld mode selection.

-Arc Control adjustment.

-Weld sequence control (Preflow Time, Run-in WFS, etc.)

1 23 4 5

	72		ALUMINUM
			3/64"
IR PORT
				SETUP
	PULSE 4043 Ar
WELD MODE					START OPTIONS
ARC CONTROL					END OPTIONS
		SET
6	7		8	9	10
ITEM		DESCRIPTION
1	IR (Infrared) Port.
2	Weld Mode Number.
3	Weld Wire Type.
4	Wire Size.
5	Weld Mode Description.
6	Status LED Lights-Weld Mode/Arc Control.
7	Selection Pushbutton Weld Mode or Arc
	Control.
8	“Set” (Adjustment) Dial / Knob
9	Selection Pushbutton Start and End
	Options.
10	Status LED Lights-Start/End Options.

Through the use of alphanumeric displays, the MSP4 provides standard text messages designed to enhance the user’s understanding of the machine’s operation as well as provide advanced capabilities The panel provides:

•Clear identification of the selected weld mode.

•Identification of weld modes not listed on the preprinted weld mode list label.

•Control of up to four wave controls (arc controls.)

•Weld mode specific wave control name display (Peak, Background, Pinch, etc.).

•Unit values are displayed (Amps, in/min, etc.).

•User-friendly machine setup and configuration.

•Limit setting for restricting the operators range of control.

•Lockout to prevent unauthorized changes to machine configuration.

Additionally, the MSP4 includes an infrared (IR) port for wireless communication and configuration using a Palm OS based hand held computer and a simplified control layout.

POWER FEED 10M SINGLE/DUAL