Lincoln Electric SVM172-A service manual Conduit Adapters, Dual Procedure Switch Options

CC-5 ACCESSORIES CC-5

Return to Master TOC

Return to Master TOC

K1500-4 (MILLER CONNECTION)

For any gun having a newer style Miller connector. Install gun adapters per the instructions shipped with it.

K1500-5 (OXO CONNECTION)

For any gun having an OXO style connector. Install gun adapters per the instructions shipped with it.

CONDUIT ADAPTERS

K1546-2 ADAPTER

for use with Lincoln Magnum conduit and E-Beam con- duit (wire sizes 1/16 - .120)

For Magnum conduit:

Install the K1546-2 gun adapter at the incoming end of the feed plate, secure with the set screw located at the back of the feed plate. If a brass fitting is supplied with the conduit, remove it from the feeder end of the con- duit by unscrewing it. Insert the conduit into the K1546- 2, secure the conduit by fastening it the the adapter with the supplied knob screw.

K683-1 DUAL PROCEDURE SWITCH

The K683-3 Dual Procedure Switch is the recommend- ed method of obtaining dual procedure for non-Fast- Mate guns; but a K683-1 can be used. For using a K683-1 with a fast mate gun, see USING DUAL PRO- CEDURE WITH FAST-MATE GUNS. A K683-1 Dual Procedure Switch can be used on the Power Feed 10 Dual if a K686-2 adapter is used. The K686-2 kit includes the gun switch and mountings for Lincoln Innershield and Magnum guns, with 15 ft. (4.5 m) con- trol cable and 3-pin plug. K686-2 Adapter permits the 3-pin plug from the K683-1and 5-pin gun trigger plug to be connected to the 5-pin trigger/dual procedure receptacle on the wire feeder.

USING DUAL SCHEDULE WITH FAST- MATE GUNS ON -10 SERIES FEEDERS

Configuration 1

K489-7 Dual Schedule Fast-Mate adapter

K575-[ ] Magnum 400 DS/FM gun (or competitive DS/FM gun)

Return to Section TOC

Return to Section TOC

Return to Section TOC

Return to Section TOC

Return to Master TOC

Return to Master TOC

For E-Beam Conduit:

Install the K1546-2 gun adapter at the incoming end of the feed plate, secure with the set screw located at the back of the feed plate. Insert the conduit into the K1546-2, secure the conduit by fastening it the the adapter with the supplied knob screw.

DUAL PROCEDURE SWITCH OPTIONS

K683-3 DUAL PROCEDURE SWITCH

Kit includes gun switch, and mountings for Lincoln Innershield and Magnum guns, with 15 ft. (4.5m) con- trol cable and 5-pin plug with two leads to connect to gun trigger.

Connect the 5-pin plug of the K683-3 Dual procedure Switch to the Power Feed 10 Dual Wire Feeder Trigger/Dual Procedure 5-socket receptacle.

The two lead plug cord extending out of the 5-pin plug of the Dual Procedure switch is to be connected to the two trigger leads of the welding gun per instructions shipped with the kit.

Configuration 2*

K489-7 Dual Schedule Fast-Mate adapter

K683-1 Dual Procedure Switch (3 pin) K686-2 "Y" adapter (3pin + 5 pin to 5 pin)

*Non-DS Fast-Mate gun (Magnum 450WC, Magnum 200, Magnum 300, Magnum 400, and others)

K590-6 WATER CONNECTION KIT

Install per the instructions shipped with the kit.

K1536-1 WATER FLOW SENSOR KIT

Install per the instructions shipped with the kit

POWER FEED 10M SINGLE/DUAL