
Setting Environment to Bug/Operating System
Table A-1. ENV Command Parameters (Continued)
ENV Parameter and Options | Default | Meaning of Default |
|
|
|
Y | Yes, Enable the | |
[Y/N] |
| Decoder. |
|
|
|
02 | Works the same as Slave Control #1. | |
|
| Default is $02. |
|
|
|
ROM Speed Bank A Code | 05 | Used to set up the ROM speed. |
ROM Speed Bank B Code | 05 | Default is $05 = 165 ns (25 MHz |
|
| MVME187) or $04=145 ns (33 MHz |
|
| MVME187). |
|
|
|
Static RAM Speed Code | 01 | Used to set up the SRAM speed. |
|
| Default is $01 = 125 ns (25 MHz |
|
| MVME187) or $00=115 ns (33 MHz |
|
| MVME187). |
|
|
|
PCC2 Vector Base | 05 | Base interrupt vector for the |
VMEC2 Vector Base #1 | 06 | component speciÞed. Default: |
VMEC2 Vector Base #2 | 07 | PCCchip2 = $05, VMEchip2 Vector 1 = |
|
| $06, VMEchip2 Vector 2 = $07. |
|
|
|
VMEC2 GCSR Group | CE | SpeciÞes the group address |
Base Address |
| ($FFFFXX00) in Short I/O for this |
|
| board. Default = $CE. |
|
|
|
VMEC2 GCSR Board Base | 00 | SpeciÞes the base address |
Address |
| ($FFFFCEX0) in Short I/O for this |
|
| board. Default = $00. |
|
|
|
VMEbus Global Time Out Code | 01 | This controls the VMEbus timeout |
|
| when this MVME187 is the system |
|
| controller. Default $01 = 64 ∝s. |
|
|
|
Local Bus Time Out Code | 00 | This controls the local bus timeout. |
|
| Default $00 = 8 ∝s. |
|
|
|
VMEbus Access Time Out Code | 02 | This controls the local bus to VMEbus |
|
| access timeout. Default $02 = 32 ms. |
|
|
|
A |