
1 |
Introduction to the MVME187 Installation Guide
Control and Status Bit Definitions
The terms control bit and status bit are used extensively in this document to describe certain bits in registers.
Term | Describes |
|
|
Control bit | The bit can be set and cleared under software |
| control. |
|
|
Status bit | The bit reflects a specific condition. |
|
|
❏The status bit can be read by software to determine operational or exception conditions.
True/False Bit State Definitions
True and False indicate whether a bit enables or disables the function it controls:
Term | Indicates |
|
|
True | Enables the function it controls. |
|
|
False | Disables the function it controls. |
|
|
Bit Value Descriptions
In all tables, the terms 0 and 1 are used to describe the actual value that should be written to the bit, or the value that it yields when read.