Motorola MVME187 manual Guide

A

Configure and Environment Commands

Table A-1. ENV Command Parameters (Continued)

ENV Parameter and Options	Default	Meaning of Default
Slave Address Translation	00000000	This register deÞnes which bits of the
Select #1		Translation Address are signiÞcant. A
		logical one "1" indicates signiÞcant
		address bits, logical zero "0" is non-
		signiÞcant. The non-signiÞcant bits
		will come from the VMEbus address
		that accesses the local resource.
		Normally, MS bits will be set, down to
		the size of memory to be accessed.
		Default is $0.
Slave Control #1	01FF	DeÞnes the access restriction for the
		address space deÞned with this slave
		address decoder. Default is $01FF. See
		description of VMEchip2 bits in Single
		Board Computer ProgrammerÕs Reference
		Guide.
Slave Enable #2 [Y/N]	Y	Yes, Setup and enable the Slave
		Address Decoder #2.
Slave Starting Address #2	FFE00000	Base address of the local resource that
		is accessible by the VMEbus, as
		viewed by the VMEbus. Default is the
		base address of static RAM,
		$FFE00000.
Slave Ending Address #2	FFE1FFFF	Ending address of the local resource
		that is accessible by the VMEbus, as
		viewed by the VMEbus. Default is the
		end of static RAM, $FFE1FFFF.
Slave Address Translation	00000000	Works the same as Slave Address
Address #2		Translation Address #1. Default is $0.
Slave Address Translation	00000000	Works the same as Slave Address
Select #2		Translation Select #1. Default is $0.
Slave Control #2	01EF	Works the same as Slave Control #1.
		Default is $01EF.

A-10