NEC NEAX2400 system manual Acan

DATA PROGRAMMING

Assignment of FCH Related Data

STEP 4: ACAN

Assign the Fusion Connection Index Code (FCIC) and the LENs on an adjacent FPC basis. Figure 5- 34 shows a sample data sheet for Node A.

Note: It is not necessary to assign the same number as trunk and FCIC. However, FCIC numbers between adja- cent nodes must be identical.

A sample data sheet at Node A is as follows.

FPC = 2	FCIC = 1	C_LENS = 000010
FPC = 2	FCIC = 2	C_LENS = 000011
FPC = 2	FCIC = 3	C_LENS = 000012
FPC = 2	FCIC = 4	C_LENS = 000013￿
:	:	:

			LCN			LCN
LCN
	Node A		TRK 1	TRK 31		Node B	LCN
	1	FCIC=1			FCIC=1
NCN		FCIC=2	TRK 3	TRK 32	FCIC=2	2
			:	:
		FCIC=n	:	:	FCIC=n
			TRK 10	TRK 40

Self-Node C_RT=10 Adjacent-Node

LCN

LCN

FCIC number must be identical

Figure 5-34 ACAN Sample Data Sheet

The ACAN command display should look similar to the following:

ACAN (Assignment of CIC Number between Adjacent Node for Network)

			Assign Adjacent FPC
	FPC	FCIC		Fusion Circuit Identification Code
	2	1
C_LENS				C_LENS
000011
	WRT?

For Help, press F1

Figure 5-35 ACAN Command Display (example)

CHAPTER 5 ND-70185 (E)

Page 86

Revision 3.0