
DATA PROGRAMMING
Assignment of FCH Related Data
STEP 3: ANNDL/AMND
Assign the necessary number of digits using the ANNDL or the AMND command depending on the route data.
•When the ARTD command OSGS is 2 (Second Dial Tone), use the ANNDL (Necessary Digits Data) command.
RT=100 OG NND=12
RT=200 OG NND=12
•When the ARTD command OSGS is 4/6/7 (Sender Immediate Start/Sender Delay Dial Start/ Sender Wink Start), use the AMND command.
DC=9 MND=12
STEP 4: ARSCN
Assign the Route Restriction Class (RSC) that allows RRIs for the external trunk route. The same route restriction data must be assigned for each node.
7.1.3LCR/LCRS
A procedure for assigning LCR/LCRS access code is explained using the following example.
Node C | Node B BUSY | Destination |
Node | ||
FCCS | ACIS |
|
| TLT |
|
| LGRT:10 |
|
STN (C) | FCCS |
|
Station C dials |
|
|
| LGRT:200 |
|
| PSTN | |
| COT | |
|
| |
|
| |
| Node A |
|
Figure 5-38 Example of LCR/LCRS
CHAPTER 5 |
Page 90
Revision 3.0