NEC NEAX2400 system manual Afch

DATA PROGRAMMING

Assignment of FCH Related Data

STEP 3: AFCH

Assign FCH number on an FCH circuit card basis. In the following example, FCHN=1 is assigned for the FCH circuit card. For the FGH card, FCHN assignment is not necessary.

PBX

RT10

DTI

Speech

Fusion Network

			AFCH command display
	FCH		FCHN
	RT11		1
	Signal	IP address: xxx.xxx.xxx.x	FCHEN
			000030 Note 1
RT15
	HUB	ROUTER

		Note 1 : This setting is a sample.
	FGH	IP address: aaa.aaa.aaa.a
	DTI	External LAN
RT14	DTI	FCHN=1
	MDF	Note 2
	FCH	FCHEN: 000030
	HUB	Internal LAN

CPU LANI

Note 2: This card cannot be used as a CCIS #7 signaling channel.

Figure 5-43 Assignment of FCHN (Example)

STEP 4: AGIP

Assign IP addresses of FGH card and its connected router.

FCHEN (FCH Equipment Number): Assign LV0 data of FGH LENs.

FGH_IP (FGH IP Address): Assign IP address of the FGH card.

DG_IP (Default Gateway IP address): Assign IP address of the router.

ARP (ARP Frame Type): Assign "2 (=DIX spec.)".

CONTTYP (Voice Channel Control Type): Assign "1 (=Server)".

LINK_NUM (Qsig-Prime Link Number) : Assign the number (1-32) of interfaces for speech (=total DTI card number).

CSLINK_NUM (Client /Server Connection Max. Number): Assign "0".

CHAPTER 5 ND-70185 (E)

Page 100

Revision 3.0