NEC NEAX2400 System Configuration, Chapter, ND-70185E, Page Revision, FPC=11, FPC=10, PC=2

SYSTEM CONFIGURATION

System Considerations

Example: 3 When a node is linked with LAN interface

NEC	Node B	Node C
PRT

PC=3￿	FCCS
FPC=11	FPC=10
CCIS	FCCS with LAN
PC=2	FPC=12
CCIS	Node D
Node A
13-H￿	Center Node: Node E
1. xxxx xxxx 0010 1222￿

4.x0010 1110 10110 1FFF￿

7.E23C CAAB12 000 0000

NEC	PC=1
Centralized MAT	Node E
Fusion

Figure 3-16 Centralized Management Report-Fusion (Example 3)

Node A: To send system messages to Node E, assign Point Code of Node C (1) to ASYD, SYS 1, Indexes 184 and 185.

Node B: To send system messages to Node E, assign Point Code of Node C (1) to ASYD, SYS1, Indexes 184 and 185. When this system data is assigned, system messages received from Nodes C and D are also transferred to Node E. However, when this data is not assigned (0), system messages re- ceived from Nodes C and D are ignored and not transferred to Node E.

System messages received from Nodes C and D are not output to the system message printer con- nected to Node B.

Node C/D: To send system messages to Node E via Node B and Node A, assign Fusion Point Code of Node B (11) to ASYDL, SYS 1, Index 532.

Node E: Received system messages are stored in the memory area for Centralized Management Report-Fu- sion.

CHAPTER 3 ND-70185 (E)

Page 24

Revision 3.0