DATA PROGRAMMING
Assignment of Numbering Data for Telephone Numbers
STEP 3: ASPAN
Assign special access code data for the Telephone Numbers using the ASPAN command. SRV=TELN is the data for Telephone Numbers.
- ASPAN Data Sheet (example) |
|
| Telephone Number | ||
- NCN (Node A) |
| SRV (Kind of Service) | |||
|
|
| TELN: Telephone Number | 4 x x x x x | |
|
|
|
|
| |
TN = 1 | ACC = 4 | CI = N (Normal) | SRV = TELN | NND = 6 | 6 digits |
| |||||
TN = 1 | ACC = 4 | CI = H (Hooking) | SRV = TELN | NND = 6 |
|
Figure 5-16 ASPAN Sample Data Sheet
ASPAN (Assignment of Special Access Code Data for Network Data Memory)
TN |
| 1st DC | CI | |
1 |
| 4 |
| N |
SRV |
| NND |
| |
TELN |
| 6 |
|
|
|
|
|
|
|
ACC (Access Code): max 6 digits
CI (Connection Index)
N:Normal
H:Hooking
B:Busy
SRV (Kind of Service) Note TELN: Telephone Number
NND (Maximum Number of Digits): 1 - 16 (digits)
Note: Available SRV is Telephone Number only. For more information, see the “Office Data Specification”.
Figure 5-17 ASPAN Command Display
Note: The Numbering Plan data for the LDM and/or NDM cannot use separate Tenant Numbers (TN). Therefore, be sure to assign the following data on the ASYDL command.
•ASYDL command, SYS1, INDEX 800
b1 = 1 (ASPAL command tenant data table development on LDM = Common) b2 = 1 (ANPDL command tenant data table development on LDM = Common)
ND-70185 (E)CHAPTER 5
Page 69
Revision 3.0
