NEC NEAX2400 Free Numbering, General, Fault information can be collected at NCN via Fusion Link

GENERAL

Free Numbering

2. Free Numbering

A Telephone Number can be assigned to a desired station on the Fusion network using the simple command operation shown below.

In this figure, the user is changing the location of Telephone Number "411111" to Node B.

MAT

Telephone #: 411111 ￿

Node A STN: 2000

Telephone #: 411111 ￿

Node B STN: 2000

Note

user

Telephone Number 411111

Node A

STN 2000

NCN

Ch		Node C
an	g
	e
	l
	o
	c
	a
	t
	i
	o
	n

STN 2000

Node B

LN

Fusion Network

STN 2000

LN

NCN: Network Control Node LN: Local Node

STN: Physical Station Number

Note: The ALGSN command is used for assigning Telephone Numbers. See 5.6 "Assignment of Telephone Numbers" for more ￿ detail.

Figure 2-2 Free Location

2.1Centralized Maintenance Administration Terminal (MAT)

A Fusion network has one Network Control Node (NCN) and Local Nodes (LNs). The NCN has the Cen- tralized-MAT, which runs on Windows 95/NT. The MAT can collect fault information from all nodes on the network. The NCN has Network Data Memory, which stores the data related to network level. The Tele- phone Numbers, for example, can be changed using the Centralized-MAT at the NCN. The MAT also al- lows the user to manage network-level office data.

Fault information can be collected at NCN via Fusion Link.						Node C
Fault Information			Node A
Node B￿
December 12 1997￿					Fusion Link
AM 3:12:13
Node B	FCH Failure	PRT			Node B
			MAT			LN
		13-H	13-H	Fusion Network
		1. xxxx xxxx 0010 1222	7. E23C CAAB12 000 0000
			1. xxxx xxxx 0010 1222
MG: 00		4. x0010 1110 10110 1FFF	4. x0010 1110 10110 1FFF
		7. E23C CAAB12 000 0000	NCN
		NEC
U	: 02
G	: 11
Note			Fault Information		FCH fault....
:
:
:					LN
Note: Actual system message is indicated in a different format. NCN: Network Control Node						LN: Local Node
	Figure 2-3 Centralized MAT on Fusion Network
CHAPTER 2			ND-70185 (E)
Page 4
Revision 3.0