Carrier 48/50AJ Controls SET Point and Configuration LOG, Expansion Range Default Entry

CONTROLS SET POINT AND CONFIGURATION LOG

MODEL NUMBER:	Software Version
SERIAL NUMBER:	MBB	CESR131343--
DATE:	RCB	CESR131249--
TECHNICIAN:	ECB	CESR131249--
	NAVI	CESR131227--
	SCB	CESR131226--
	CEM	CESR131174--
	MARQ	CESR131171--

ITEM	EXPANSION		RANGE	DEFAULT	ENTRY
UNIT	UNIT CONFIGURATION
→C.TYP	Machine Control Type	1	- 6 (multi-text strings)	4
→CV.FN	Fan Mode (0=Auto, 1=Cont)	0	- 1 (multi-text strings)	1
→RM.CF	Remote Switch Config	0	- 3 (multi-text strings)	0
→CEM	CEM Module Installed	Yes/No		No
→TCS.C	Temp.Cmp.Strt.Cool Factr	0	- 60 min	0
→TCS.H	Temp.Cmp.Strt.Heat Factr	0	- 60 min	0
→SFS.S	Fan Fail Shuts Down Unit	Yes/No		No
→SFS.M	Fan Stat Monitoring Type	0	- 2 (multi-text strings)	0
→VAV.S	VAV Unocc.Fan Retry Time	0	- 720 min	50
→SIZE	Unit Size (20-60)	20 - 60		20
→DP.XR	Disch.Press. Transducers	Yes/No		No
→SP.XR	Suct. Pres. Trans. Type	0	-1 (multi-text strings)	0
→RFG.T	Refrig: 0=R22 1=R410A	0	-1 (multi-text strings)	1
→CND.T	Cnd HX Typ:0=RTPF 1=MCHX	0	-1 (multi-text strings)	0
→MAT.S	MAT Calc Config	0	- 2 (multi-text strings)	1
→MAT.R	Reset MAT Table Entries?	Yes/No		No
→MAT.D	MAT Outside Air Default	0-100%		20
→ALTI	Altitude……..in feet:	0	- 60000	0
→DLAY	Startup Delay Time	0	- 900 sec	0
→STAT	TSTAT_Both Heat and Cool	Yes/No		No
→AUX.R	Auxiliary Relay Config	0	- 3	0
→SENS	INPUT SENSOR CONFIG
→SENS→SPT.S	Space Temp Sensor	Enable/Disable		Disable
→SENS→SP.O.S	Space Temp Offset Sensor	Enable/Disable		Disable
→SENS→SP.O.R	Space Temp Offset Range	1	- 10	5
→SENS→RRH.S	Return Air RH Sensor	Enable/Disable		Disable
→SENS→FLT.S	Filter Stat.Sw.Enabled ?	Enable/Disable		Disable
COOL	COOLING CONFIGURATION
→Z.GN	Capacity Threshold Adjst	–10 - 10		1
→MC.LO	Compressor Lockout Temp	–20 - 55 dF		40
→C.FOD	Fan-Off Delay, Mech Cool	0	- 600 sec	60
→MLV	Min. Load Valve? (HGBP)	Yes/No		No
→M.M.	Motor Master Control	Yes/No		No
→HPSP	Head Pressure Setpoint	80 - 150 dF		113
→A1.EN	Enable Compressor A1	Enable/Disable		Enable
→A2.EN	Enable Compressor A2	Enable/Disable		Enable
→B1.EN	Enable Compressor B1	Enable/Disable		Enable
→B2.EN	Enable Compressor B2	Enable/Disable		Enable
→CS.A1	CSB A1 Feedback Alarm	Enable/Disable		Enable
→CS.A2	CSB A2 Feedback Alarm	Enable/Disable		Enable
→CS.B1	CSB B1 Feedback Alarm	Enable/Disable		Enable
→CS.B2	CSB B2 Feedback Alarm	Enable/Disable		Enable
→REV.R	Rev Rotation Verified ?	Yes/No		No
→H.SST	Hi SST Alert DelayTime	5	- 30 min	10
EDT.R	EVAP.DISCHRGE TEMP RESET
→RS.CF	EDT Reset Configuration	0	- 3 (multi-text strings)	0
→RTIO	Reset Ratio	0	- 10	2
→LIMT	Reset Limit	0	- 20 ^F	10
→RES.S	EDT 4-20 ma Reset Input	Enable/Disable		Disable

Manufacturer reserves the right to discontinue, or change at any time, specifications or designs without notice and without incurring obligations.

Catalog No. 04-53480077-01 Printed in U.S.A. Form 48/50A-9T Pg CL-1 6-10 Replaces: 48/50A-7T