EX- FCCS

Data Programming

4.Data Programming

This section explains how to assign a brand-new EX-FCCS network data. There are some conditions for data programming to be required for EX-FCCS.

1.When connecting a stand-alone NEAX2400 IMX, non-fusion system (via EX-FCCS) or a NEAX2000 IVS2 using Enhanced CCIS feature to an existing FUG:

(a)The system must be the NCN.

(b)The system is programmed as the Fusion Network configured by one NCN only.

(c)Use the NDM of the system to program the network data.

2.When connecting the NEAX2400 IMX system and the NEAX2000 IVS2 system, CIC (Circuit Identifica- tion Code) =1 should always be assigned using ACIC2 command.

3.ACSCL command data (CCH location per CSCG) must be programmed against the PC of the connected NEAX2400 IMX or NEAX2000 IVS2 system using ACIC1 command.

ND-70185 (E)CHAPTER 8

Page 185

Revision 3.0

Page 200
Image 200
NEC NEAX2400 system manual Data Programming