NEC NEAX2400 Anpdn command display should look similar to the following, Telephone Number X x x

DATA PROGRAMMING

Assignment of Numbering Data for Telephone Numbers

STEP 2: ANPDN

Assign Pre-translation Data for the Telephone Numbers planned in Step 1 using the ANPDN com- mand at NCN. In Figure 5-14, the data setting should be as follows:

-ANPDN Data Sheet (example)￿

-NCN (Node A)

TN = 1	1st DC = 4	CI = N (Normal)	NND = 6	BLF = 0
TN = 1	1st DC = 4	CI = H (Hooking)	NND = 6	BLF = 0

Telephone Number

4 x x x x x

6 digits

Figure 5-14 ANPDN Sample Data Sheet

The ANPDN command display should look similar to the following:

ANPDN (Assignment of Numbering Plan for Network Data Memory)

TN	1stDC	CI
1	4	N
NND	BLF
6	1

1stDC (1st Digit Code): ASCII 0 - 9, *, #

CI (Connection Index)

N:Normal

H:Hooking

B:Busy

NND (Necessary Digit): 1 - 16 digits

BLF (Busy Lamp Field):

0:Out of Service

1:In Service

Figure 5-15 ANPDN Command Display

Note: Perform the Numbering Plan data setting by using ANPD command in the same way as assigned by ANPDN command.

CHAPTER 5 ND-70185 (E)

Page 68

Revision 3.0