Manuals / NEC / Computer Equipment / Network Cables

NEC NEAX2400 system manual Introduction, General, How to Follow This Manual

Models: NEAX2400

1 213

Download 213 pages 13.1 Kb

Page 16

CHAPTER 1 INTRODUCTION

1.General

This manual covers the installation of the Fusion system.

2.How to Follow This Manual

This manual consists of the following chapters.

•CHAPTER 1 (INTRODUCTION) Explains how to use this manual.

•CHAPTER 2 (GENERAL)

Outlines the Fusion system configuration and lists available service features.

•CHAPTER 3 (SYSTEM CONFIGURATION)

Explains the hardware configuration of the Fusion system.

•CHAPTER 4 (INSTALLATION) Consists of the following topics:

•Static Cautions

•Switch Settings (PA-M96, PA-FCHA, PA-24DTR)

•CHAPTER 5 (DATA PROGRAMMING)

Provides basic data assignment procedures using the following examples.

•Installing a new Fusion network

•Upgrading a CCIS network

•CHAPTER 6 (POST INSTALLATION TEST)

Explains how to perform installation tests, focusing on the Fusion link connection test.

•CHAPTER 7 (TROUBLESHOOTING)

Explains Fusion-related system messages and the repair procedures.

•CHAPTER 8 (EX-FCCS)

Consists of the following EX-FCCS topics:

•Network Configuration

•Feature Descriptions

•Data Programming

ND-70185 (E)CHAPTER 1

Page 1

Revision 3.0

Image 16

NEC NEAX2400 system manual Introduction, General, How to Follow This Manual

Contents

ND-70185E ISSUE STOCK # MAY,Fusion Network System Manual NEC America, IncLIABILITY DISCLAIMER NEC America, IncND-70185E ISSUE NEAX2400 IMX Fusion Network System ManualPAGE No PAGE No TABLE OF CONTENTS ISSUEND-70185ETABLE OF CONTENTS Page Revision NEAX2400 IMXTABLE OF CONTENTS CONTINUED TABLE OF CONTENTSND-70185E Page RevisionND-70185ETABLE OF CONTENTS Page Revision TABLE OF CONTENTS CONTINUEDPage TABLE OF CONTENTS CONTINUED TABLE OF CONTENTSCHAPTER ND-70185ELIST OF FIGURES LIST OF FIGURESFigure TitleLIST OF FIGURES CONTINUED FigureTitle PageLIST OF FIGURES CONTINUED FigureTitle ND-70185ELIST OF FIGURES Page RevisionLIST OF FIGURES CONTINUED TitleLIST OF FIGURES ND-70185ELIST OF TABLES TableTitle ND-70185ELIST OF TABLES Page ix RevisionThis page is for your notes LIST OF TABLESND-70185E Page RevisionCHAPTER 1 INTRODUCTION 2.How to Follow This Manual1.General 3.Related Manuals 1.What is Fusion and its Advantages CHAPTER 2 GENERAL2. Free Numbering GENERALFigure 2-2Free Location Figure 2-3Centralized MAT on Fusion Network3.Fusion System Configuration Figure 2-4Fusion System Configuration with FCHFigure 2-5Fusion System Configuration without FCH GENERAL4.Node 5.Data Memory Configuration 6. Fusion Network Examples GENERALFigure 2-8Network Data Memory Copy Figure 2-9Closed Numbering Fusion-CCISNetwork⋅ : Available Not available7.Tandem Connections via Fusion Link GENERALFigure 2-11Tandem Connections via Fusion Link CHAPTERCHAPTER 3 SYSTEM CONFIGURATION 1.Fusion System without FCH2.Fusion System with FCH Figure 3-5Redundant Configuration FCH and DTI SYSTEM CONFIGURATIONND-70185ECHAPTER Page Revision 3.System Considerations SYSTEM CONFIGURATIONFigure 3-6 Non-RedundantConfiguration 3.1Fusion Network ConditionsSYSTEM CONFIGURATION Figure 3-8Fusion Tandem ConnectionsFigure 3-9Maximum Number of Ports between Nodes ND-70185ECHAPTER Page RevisionSYSTEM CONFIGURATION Figure 3-10Connection Trunk Alternate RoutingFigure 3-11Fusion Network on an Associated Basis CHAPTERSpecifications on Release 2 or earlier software SYSTEM CONFIGURATION 3.2Centralized Billing - Fusion Polling MethodCentralized Billing - Fusion 1/3 CHAPTERSYSTEM CONFIGURATION Figure 3-12Centralized Billing - Fusion 2/3ND-70185ECHAPTER Page Revision pollingSYSTEM CONFIGURATION Figure 3-12Centralized Billing - Fusion 3/3CHAPTER ND-70185ESYSTEM CONFIGURATION 3.3Centralized Management Report-FusionFigure 3-13Centralized Management Report-Fusion ND-70185ECHAPTER Page RevisionSYSTEM CONFIGURATION CHAPTERND-70185E Page RevisionND-70185ECHAPTER Page Revision SYSTEM CONFIGURATIONPC=11 SYSTEM CONFIGURATION CHAPTERND-70185E Page RevisionASYD, SYS2, INDEX SYSTEM CONFIGURATION 3.4.2Central Office Incoming Call Ring DownFigure 3-18Ring Down Calls on a Fusion Network CHAPTERSYSTEM CONFIGURATION 3.4.3Day/Night ChangeFigure Day/Night Information TransferThis page is for your notes CHAPTERND-70185E Page RevisionCHAPTER 4 INSTALLATION 1.Anti-StaticCautionINSTALLATION Figure 4-2How to Use the Anti-staticKitCHAPTER ND-70185E•Fusion with FCH HUB PA-M96FCH PA-FCHADTI PA-24DTR 2.Key Setting on Circuit Cards INSTALLATIONFigure 4-4Switch Setting on HUB PA-M96Card Table 4-1SENSE Switch SettingINSTALLATION Figure 4-5Switch Setting on FCH PA-FCHACardOFF: T203 Timer = 10 secs. Standard Setting ON: T203 Timer = VariableNote 1: 64Kbps is used for T1 or E1 interface INSTALLATION Figure 4-6Switch Locations on DTI PA-24DTRCardTable 4-4Switch Setting Patterns for the DTI Card SWITCH NAMEINSTALLATION SWITCH NAMESWITCH SETTINGINSTALLATION SWITCH NAMESWITCH SETTINGINSTALLATION SWITCH NAMESWITCH SETTINGINSTALLATION SWITCH NAMESWITCH SETTING3.Mounting Circuit Cards in PIM INSTALLATIONPIM1 PIM0INSTALLATION 3.2Mounting FCH PA-FCHAand DTI PA-24DTRCardsFigure 4-8Mounting FCH and DTI Cards ND-70185ECHAPTER Page Revision4.Connecting Cables INSTALLATION4.1Connecting DTI-FCHFront Cables Figure 4-9Connecting Front CablesINSTALLATION Figure 4-10FCH Cascade ConnectionsND-70185ECHAPTER Page Revision FCHPA-FCHAINSTALLATION 4.2Connecting 10 BASE-TCablesFigure 4-11Overall 10 BASE-TConnections CHAPTER1.Cable unit specified as SR1201 ETIF CAU-n INSTALLATION 4.3.4Procedure for 4-IMGSystemCHAPTER ND-70185E4.3.5Procedure for IMX-USystem INSTALLATIONND-70185ECHAPTER Page Revision INSTALLATION Figure 4-12Connecting 10 BASE-TCables exampleCHAPTER ND-70185EINSTALLATION INSTALLATION CHAPTERND-70185E Page RevisionINSTALLATION INSTALLATION INSTALLATION ND-70185ECHAPTER Page Revision<FCH in PIM 2 Pattern 3> <FCH in PIM2 Pattern 4>Pattern INSTALLATION ND-70185ECHAPTER Page Revision<FCH in PIM 3 Pattern 3> FCH in PIM 3 PatternThis page is for your notes CHAPTERND-70185E Page RevisionCHAPTER 5 DATA PROGRAMMING Figure 5-1Data Programming Flow ChartSystem Data Numbering Plan Data Station Data •Fusion Link Data1.Network Data Programming Summary •Decide an NCN and LN on the network Fusion w/o FCH: ACRD AFPC ND-70185ECHAPTER Page Revision DATA PROGRAMMINGNumbering Plan Data for Telephone Numbers 2. Assignment of System Data STEP 2: ASYDL Index 3.Assignment of FPC and MG and UNIT into Network Figure 5-9AFMU Command Display ND-70185ECHAPTERDATA PROGRAMMING 3.1AFMU4.Assignment of Logical RT in Network DM NDM DATA PROGRAMMING4.1ALRTN/ARTKN Figure 5-10Telephone Number RequiredSTEP 1: ANPDN STEP 2: ANPDN STEP 3: ASPAN 6.Assignment of Telephone Numbers Figure 5-19ALGSN Command Display example DATA PROGRAMMINGND-70185ECHAPTER Page Revision Telephone NumberSTEP 1: ACRD DATA PROGRAMMING Table 5-1Route Class Data AssignmentNode A Node BTrunk Kind FPEG Fusion Trunk Peg Count STEP 2: ACTK DATA PROGRAMMING C_RTC_TK1-4095 C_LENS6.1.2When FCH is Mounted in a High Density Slot DATA PROGRAMMINGCHAPTER ND-70185EFigure 5-25How to Assign C_LEN Data Type DATA PROGRAMMINGND-70185ECHAPTER Page Revision 0002DATA PROGRAMMING C_RTC_TK C_LENS7.Assignment of FCH Related Data Figure 5-28AFCH Command Display example DATA PROGRAMMINGFigure 5-27Assignment of FCH Number CHAPTERFigure 5-29AFRT Sample Data Sheet Figure 5-30AFRT Command DisplayDATA PROGRAMMING ND-70185ECHAPTER Page RevisionSTEP 3: AFPC 23 LNDATA PROGRAMMING Figure 5-33AFPC Sample Data SheetND-70185ECHAPTER Page Revision STEP 4: ACAN DATA PROGRAMMING STEP 1 ANPDN/ANPDL Note STEP 1: ANPDN/ANPDL Note STEP 3: ANNDL/AMND ANPDL → ASPAL →AFRSL → AOPRL →ANPDL → ASPAL →AFRSL → AOPRL →SDT SDH/SONET Digital Trunk FCH: Fusion Call Control HandlerDATA PROGRAMMING 7.2Data Assignment for 52M-SDHInterfaceNetwork RouteNumber Example Available•Connection Link for Data C_RT: TCL=4 LSG=13 STEP External Router Fusion over IP DATA PROGRAMMING Figure 5-41Connection Route Class Data SampleCHAPTER ND-70185EDATA PROGRAMMING Figure 5-42Sample Data Assignment ACTKND-70185ECHAPTER Page Revision FCHRT14STEP 3: AFCH STEP 5: AFPC Assign internal LAN routing data STEP 6: AETH STEP 7: ACAN DATA PROGRAMMING 7.3.2FCCS Networking over IPFigure 5-49FCCS Networking over IP - Overview CHAPTERNote: This data setting is an example DATA PROGRAMMINGFigure 5-51Sample Data Assignment ACRD Figure 5-52Sample Data Assignment ACTKSTEP 3 MBCT STEP 5: AETH STEP 6 ACAN STEP 8: AGIP STEP 9: AFIP Service Conditions 8.Office Data Sheets 8.1 Data Sheet for AFMUPLDATA PROGRAMMING FUSION POINT CODE8.2 Data Sheet for ALRTN DATA PROGRAMMINGLOGICAL ROUTE NUMBER LGRT FUSION POINT CODE FPC 1-2538.3 Data Sheet for ANPD/ANPDL/ANDPN DATA PROGRAMMINGTENANT 1ST DIGIT8.4 Data Sheet for ASPA/ASPAL ACCESSSERVICE DATA PROGRAMMING8.5 Data Sheet for ALGNL DATA PROGRAMMINGUSER GROUP NUMBER UGN LOGICAL STATION NUMBER LSTN MAX. 16 DIGITS8.6 Data Sheet for ALGSL TYPE1 DATA PROGRAMMINGTYPE LSTN8.7 Data Sheet for ALGSL TYPE2 DATA PROGRAMMINGTYPE LSTNOffice Data Sheets 8.8 Data Sheet for ASDTSERVICE FEATURE8.9 Data Sheet for ACRD DATA PROGRAMMINGCONNECTION RT No C_RTDATA PROGRAMMING CONNECTION RT NoC_RT FUNCTION FUNC8.10 Data Sheet for ACTK DATA PROGRAMMINGCONNECTION ROUTE NUMBER C RT CONNECTION TRUNK NUMBER C_TK 1-40958.11 Data Sheet for AFCH DATA PROGRAMMINGFCCH NUMBER LENS OF FCCH FCHENDATA PROGRAMMING FCCH NUMBERLENS OF FCCH FCHEN FCHN8.12 Data Sheet for AFPC DATA PROGRAMMINGFUSION POINT CODE FPC 1-253 FCCH USE OR NOT USE FCCH 0/1DATA PROGRAMMING FUSION POINT CODEFCCH USE OR NOT USE FCCH8.13 Data Sheet for ACAN DATA PROGRAMMINGFUSION POINT CODE FPC 1-253 FUSION CIC NUMBER FCIC 1-40958.14 Data Sheet for AFRT DATA PROGRAMMINGFCCH NUMBER FCHN 1-255 CONNECTION ROUTE C_RT8.15 Data Sheet for AETH GATEWAY USING FLAG USE_GATE 0/1DATA PROGRAMMING DESTINATION FPC FPC 1-2538.16 Data Sheet for AGIP IP ADDRESS FOR DEFAULT GATEWAY DG_IPDATA PROGRAMMING LINE EQUIPMENT NUMBER OF FCCH FCHEN MG U G LV8.17 Data Sheet for AFIP ROUTER ACCESS NUMBER RT ACC Max. 16 digitsDATA PROGRAMMING FCH NUMBER FCHN8.18 Data Sheet for AFRFL DATA PROGRAMMINGACC MAX. 24 digits CHAPTERCHAPTER 6 POST INSTALLATION TEST 1.How to Check Fusion Link by LEDs on FCH CardPOST INSTALLATION TEST Repair Procedure When LED Indicates Abnormality1.1 How to check LYR LED LED Indication•FCH PA-FCHAswitch setting 2.Line Loopback POST INSTALLATION TEST 2.3 Test ProcedureFigure 6-5How to Set the Fusion Link Test Mode Select a loopback point by setting the switch3.FCCS Network Connection Test STEP 4: The call terminates on STN B STEP 3: Answer the call by pressing the ATND key STEP 5: Release the call STEP 4: STN C answers the call 4.Fusion and Non-FusionConnection Tests STEP 5 Replace the handset of STN A 5.SDT Card Loopback Test SDT Card LoopbackTest CHAPTER 7 TROUBLESHOOTING 1. List of Fusion-relatedSystem MessagesTROUBLESHOOTING Figure 7-1Related HardwareCHAPTER ND-70185E2. 3-BPM C-levelInfinite Loop Permanent TROUBLESHOOTING2.1 Repair Procedure Figure 7-3How to Initialize the FCH PA-FCHACardTROUBLESHOOTING Figure 7-4How to Replace the FCH PA-FCHACardCHAPTER ND-70185E3. 3-CPM C-levelInfinite Loop Temporary 4.3-DPM Lockup Failure PermanentTROUBLESHOOTING 3.1 Repair Procedure5.3-EPM Lockup Failure Temporary TROUBLESHOOTING4.1 Repair Procedure 5.1 Repair ProcedureTROUBLESHOOTING Figure 7-8Fusion Link Signaling Link Failure1. xx0x 0000 0000 2. 0000 0000 0000• 13-HPermanent 7.23-SFCH Failure Notification Detection TROUBLESHOOTING 7.1 Repair ProcedureFigure 7-1210 BASE-TCable Connection Check CHAPTERTROUBLESHOOTING Figure 7-13How to Check 10 BASE-TCablesconnector modular connectorTROUBLESHOOTING CHAPTERND-70185E Page Revision8.23-TFCH Fault Notification Recovery TROUBLESHOOTINGFigure 7-15 23-TFCCH Fault Recovery Notification ND-70185ECHAPTER Page Revision9.23-UFCH Status Information ETHER Results TROUBLESHOOTING 9.2 FLTINF = 18H Spanning Tree Abnormal AnswerCHAPTER ND-70185ETROUBLESHOOTING 9.2.1Repair ProcedureFigure 7-19Spanning Tree Abnormal Answer ND-70185ECHAPTER Page RevisionTROUBLESHOOTING 9.3 FLTINF = 1DH ETHER Transfer FailureFigure 7-20 23-UETHER Transfer Failure CHAPTER9.4 FLTINF = 1EH Spanning Tree Generation End TROUBLESHOOTINGND-70185ECHAPTER Page Revision TROUBLESHOOTING 23-UFCH Status Information9.5 FLTINF = 1FH Spanning Tree Generation Start 1. xx 0x 1F xx 00 00 0010.23-WFCH Alternate Routing Start Notification 11.23-XFCH Alternate Routing End NotificationTROUBLESHOOTING ND-70185ECHAPTER Page RevisionThis page is for your notes CHAPTERND-70185E Page RevisionCHAPTER 8 EX- FCCS 1.General2.EX-FCCSNetwork Configuration ⋅ : AvailableEX-FCCSNetwork Configuration EX- FCCSNEAX2400 IMX UNAVAILABLE Enhanced CCIS IVS2 AEX- FCCS F U G F U G 2F U GCenter FUG F U G1.Conditions for PS Service 3.EX-FCCSFeatures Note 1: Destination node per FUG not to exceed 120,000 per total network Centralized Traffic Collecting Figure 8-6Centralized Maintenance - EX-FCCS FUG AFUG B FUG ANote: Message Format is the same as before 3. The CCH to be used is selected as follows EX- FCCS 3.4Centralized Message Center Interface - EX-FCCSCHAPTER ND-70185EFUG1 Center FUG field of the originating party 4.Data Programming STEP 1: ASYD STEP 2 ARTD STEP 4: MBTC STEP 7: ACIC1 STEP 1: ASYD STEP 3 AFUGN STEP 5: ARNPL •Upgrading CCIS between FUGs to EX-FCCSNetwork STEP 1: AFUGN 1.To Log-into All Nodes in EX-FCCSNetwork Assign the following data at NCN of the FUG 1.To Log-into All Nodes in EX-FCCSNetwork This page is for your notes CHAPTERND-70185E Page Revision