NEC NEAX2400 system manual Assignment of Telephone Numbers, Command ALGSN/ATSTN

DATA PROGRAMMING

Assignment of Telephone Numbers

6.Assignment of Telephone Numbers

This section explains how to program Telephone Numbers. To program Telephone Numbers, use ALGSN com- mand. Telephone Number can be assigned to a station using the LENs or the Physical Station Number depend- ing on programming.

Note: The Fusion Link must be operational before programming telephone numbers in the Fusion Network.

COMMAND: ALGSN/ATSTN

Assign Telephone Numbers to Physical Station Number (Type 2) or to physical LENS (Type 1) using the ALGSN/ATSTN command. An example data sheet-Type 2 follows.

-	ALGSN Data Sheet (example)￿	Telephone Number	Physical Station Number
-	NCN (Node A)

Type = 2	UGN = 1
Type = 2	UGN = 1
Type = 2	UGN = 1
Type = 2	UGN = 1
Type = 2	UGN = 1
	:￿
	:

TELN = 410000 TELN = 410001 TELN = 420000 TELN = 430000 TELN = 440000

:￿

:

FPC = 1	TN = 1
FPC = 1	TN = 1
FPC = 11	TN = 1
FPC = 12	TN = 1
FPC = 13	TN = 1

STN = 2000 STN = 2000 STN = 2000 STN = 2000 STN = 2000

Node A

Node B

Node C

Node D

Note: This data is a sample when the Telephone Number is assigned by the ALGSN command.

Figure 5-18 ALGSN Sample Data Sheet

CHAPTER 5 ND-70185 (E)

Page 70

Revision 3.0