15
Chapter 2
Getting started
The installer or System Administrator must set up and check the system before you can use the Attendant Console components. First, make sure you know how to start and quit Attendant Console on your PC. For information on starting the components for the first time, refer to “Initializing and configuring the Client component” on page 16. For information about changing the Attendant Console window settings refer to “Initializing and configuring the Client component” on page 16.
Starting the Client component
To start the Client component and open the Attendant Console window:
1On the Attendant PC, click Start and point to Programs, point to Nortel Networks, point to Attendant Console and then click Attendant.
The Attendant Console taskbar button appears on the taskbar. The Attendant Console window appears with the Tip of the Day window over it.
2On the Tip of the Day window click the Close button.
Minimizing and maximizing the Attendant Console window
You can minimize and maximize the Attendant Console window depending on your needs.
To minimize the Attendant Console window:
1In the title bar click Minimize .
The Attendant Console window minimizes.
To maximize the Attendant Console window:
1On the taskbar, click the Attendant Console taskbar button. The Attendant Console window returns to full screen size.
Quitting the Client component
To quit the Client component:
1On the File menu click Exit or
on the title bar click the Close box.
A message appears asking if you want to quit Attendant Console.
2Click the Yes button.
Attendant Console User Guide
