Omron CPM1A operation manual Different Keys, Mode Switch, Contrast Control, Buzzer Volume

	Using a Programming Console		Section 4-2
Different Keys		The following keys are labeled differently on the CQM1-PRO01-E and the
		C200H-PRO27-E, but the operation of the keys in each pair is identical.
		CQM1-PRO01-E Keys	C200H-PRO27-E Keys
		AR	HR
		HR
		SET	PLAY
			SET
		RESET	REC
			RESET
	Note
		To specify the AR area, use SHIFT and HR Keys for the C200H-PRO27-E and
		use SHIFT and AR/HR Keys for the CQM1-PRO01-E.

A shift symbol will be displayed in the upper-right corner of the screen when the Shift Key is pressed. The shift input can be cleared by pressing the Shift Key again.

SHIFT

^

Shift input symbol

Mode Switch	The mode switch controls the CPM1A’s operating mode. The key can be re-
	moved when the switch is set to RUN or MONITOR but it cannot be removed
	when the switch is set to PROGRAM.
Contrast Control	The display contrast can be adjusted with the control on the right side of the Pro-
	gramming Console.
	Contrast control
Buzzer Volume	The C200H-PRO27-E’s buzzer volume can be adjusted with the lever on the
	right side of the Programming Console. The CQM1-PRO01-E’s buzzer volume
	cannot be adjusted.
	Low volume
	High volume
	C200H-PRO27-E
Note	The buzzer volume can be turned on and off with a key operation. See 4-3-4
	Buzzer Operation for details.

75