Schneider Electric Processor Adapter Reading Ethernet Network Statistics, By the user, Follows

Using the Ethernet Port

Reading Ethernet Network Statistics

Overview	Ethernet Network statistics are stored in the processor adapter and can be viewed
	by the user.
Procedure
	The M1 ethernet Processor Adapter’s Ethernet Network Statistics can be viewed
	using the Network Options Ethernet Tester. This software utility is available with the
	Quantum 140 NOE 771 00 10/100 Megabit Ethernet Module User Guide 840 USE
	116 00.
Table of
	Network statistics occupy word 4 through word 35 in the Modbus Status Table, as
Statistics	follows:
		Table 1: TCP/IP Ethernet Statistics Table
		Word	Data
		00 ... 02	MAC Address
		03	Board Status
		04, 05	Rx Interrupt
		06, 07	Tx Interrupt
		08, 09	NA
		10, 11	Total Collisions
		12, 13	Rx Missed Packet Errors
		14, 15	NA
		16, 17	Chip Restart Count
			Lo word – Collison Peak Detector
		18, 19	Framing Errors (Giant Frame Error)
		20, 21	Overflow Errors
		22, 23	CRC Errors
		24, 25	Receive Buffer Errors (Out of Server Paths)
		26, 27	Transmit Buffer Errors
		28, 29	Silo Underflow (TCP retries)
		30, 31	Late Collision
		32, 33	Lost Carrier
		34, 35	16 Collision Tx Failure
		36, 37	IP Address

870 USE 101 10 V..2 153