Schneider Electric Processor Adapter manual Overview of Ports, Introduction, Ports Per

Overview of Momentum M1 Processor Adapters

Overview of Ports

Introduction			Each Processor Adapter is equipped with at least one Modbus or Ethernet port.
			Some models also have a second port. The ports allow the Processor Adapter to
			communicate with:
			λ	Programming panels
			λ Network I/O points under its control
			λ	Network supervisory computers
Ports Per
			The following table indicates which ports are available with each Processor
Processor			Adapter:
Adapter
				Port 1		Port 2
	Processor	Ethernet			Modbus	Modbus	I/O Bus
	Adapter	Port			RS-232	RS-485	Port
	171 CCS 700 00				x			1		2
	171 CCS 700 10				x
	171 CCS 760 00				x		x
	171 CCC 760 10				x		x		Schneider
									Automation Inc.
	171 CCS 780 00				x	x					171 CCS 780 00
	171 CCC 780 10				x	x
	171 CCC 960 20		x				x
	171 CCC 960 30		x				x
	171 CCC 980 20		x			x		1.		Port 1
	171 CCC 980 30		x			x
								2.		Port 2

Ethernet Port The Ethernet port is a standard, twisted pair, Ethernet 10BASE-T port which can communicate with programming panels, other M1 Processor Adapters with Ethernet ports, and with other Ethernet products. This port has an RJ45 connector, with an industry standard pinout.

Modbus Port 1 Modbus Port 1 is a general-purpose asynchronous serial port with dedicated RS232 slave functionality. This port has an RJ45 connector.

Continued on next page

22 870 USE 101 10 V.2