
I/O Mapping an I/OBus Network with Modsoft
Editing the I/OBus I/O Map, Continued
Procedure,
Continued
Step | Action | |
|
|
|
2 | Move the cursor onto the desired model number and push <Enter>. | |
| Result: The module type and its description are displayed on the I/O Map screen. | |
| The cursor is positioned so that you can assign the appropriate state RAM | |
| reference(s) to the unit. | |
| Example: If you select a 170 ADI 350 00 | |
| like this: | |
|
|
|
|
|
|
3 | Enter the desired reference | |
| be the first of two contiguous input registers for the | |
| register is automatically assigned. | |
|
|
|
4 | Move the cursor to the Module column opposite NODE 02 and push <Shift> <?>. | |
| Result: The base/module selection popup appears again over the I/O Map | |
| screen. | |
|
|
|
Continued on next page
870 USE 101 10 V.2 | 253 |