
Configuring a Modbus Plus Network in Concept with Peer Cop
Defining the References for the Next Node, Continued
Defining Global | Follow the steps in the table below to define the global input data from the | |
Inputs | supervisory PLC at Modbus Plus address 1. | |
|
|
|
| Step | Action |
|
|
|
| 1 | Click on the Global Input... button. |
|
| Result: The Global Input dialog box appears. |
|
|
|
| 2 | Since this device will be receiving data from the CPU at address 1, you do not |
|
| need to change the default sending address (selected under the heading |
|
| Type 400001 in the Dest. Ref column on the first line, to indicate the first register |
|
| the CPU will use to store the input data. |
|
|
|
| 3 | Type the value 4 in the Index column, indicating that the CPU will receive part of |
|
| the global input data beginning with the fourth word. |
|
|
|
| 4 | Type the value 7 in the Length column, indicating that the CPU will accept seven |
|
| words of the global input data. Leave the default BIN setting. |
|
|
|
| 5 | Click <OK>. |
|
|
|
Next Step |
|
|
Defining references for the supervisory PLC. | ||
|
|
|
870 USE 101 10 V.2 | 395 |