Schneider Electric Processor Adapter manual Confirming the Peer Cop Summary Information, Timeout

Using Peer Cop with Modsoft

Confirming the Peer Cop Summary Information

Overview	Once you have defined the link and accessed a node, the Peer Cop summary
	information values assume default settings. This section describes those settings
	and how to confirm or change them.
Timeout
	The default Timeout is 500 ms.
	Timeout is the maximum interval that Modbus Plus on a Peer-Copped device will
	remain healthy without communication activity. If this interval is exceeded, the
	device will clear its network health bit and will no longer try to communicate via
	Modbus Plus.
	The timeout interval must be in the range 20 ... 2000ms, and it must be specified as
	an increment of 20ms.
	For our example, we will change the timeout value to 240ms.
On Error
	The default On Error setting is CLEAR.
	The On Error setting specifies how the Peer-Copped device will treat the last
	values received before a timeout, once Modbus Plus communications have been
	restored.
	One of two settings may be used–CLEARor HOLD. CLEAR sets all the previously
	received values to 0, and HOLD retains the previous values.
	For our example, we will change the setting to HOLD.
	Continued on next page

268 870 USE 101 10 V.2