Schneider Electric Processor Adapter Devices on the Network, Strategy used to assign addresses

Using Peer Cop with Modsoft

Devices on the Network

Introduction	This section describes the five devices which comprise the sample network and the
	strategy used to assign addresses.
The Network
	The following table lists the Modbus Plus address and components of each
Devices	Momentum module on the network:
	Modbus Plus	I/O Base Type	Adapter Type
	Address
	1	(type not specified)	M1 Processor Adapter
			(type not specified)
			172 PNN 210 22
			Modbus Plus Option Adapter
	2	170 ADI 340 00	170 PNT 110 20
		16-point input	Modbus Plus Communication Adapter
	3	170 ADO 340 00	170 PNT 110 20
		16-point output	Modbus Plus Communication Adapter
	4	170 ADI 350 00	170 PNT 110 20
		32-point input	Modbus Plus Communication Adapter
	5	170 ADO 350 00	170 PNT 110 20
		32-point output	Modbus Plus Communication Adapter
Address
	In this type of architecture, assign the lowest network address (1) to the CPU.
Strategy	When the network initializes, the CPU will be the first device to get the token, and
	the token rotation table will be built with respect to the controlling device on the
	network.

264 870 USE 101 10 V.2