870 USE 101 10 V.2 399
Saving to Flash with Concept

Saving to Flash

Overview You save to Flash so that, in the event of an unexpected loss of power, the
application logic and state RAM values will be preserved.
This section describes how to save the application logic and state RAM values to Flash using Concept 2.1.
Note: You can save to Flash if you are using the 984LL executive for all mo dels,
except 171 CCC 960 30 and the 171 CCC 980 30. You can only save to
Flash on the 171 CCC 960 30 and the 171 CCC 980 30 if you are using
the Concept IEC executive.
Note: The 171 CCC 960 30 and 171 CCC 980 30 require Concept 2.2 with
service release 2.