Assembling Momentum Components

Assembling a Processor Adapter and an Option Adapter, Continued

Procedure:

Follow the steps in the table below to assemble an option adapter and an M1

Assembling an

processor.

Option Adapter

 

and Processor

Step

Action

1Choose a clean environment to assemble the Option Adapter and processor to protect the circuitry from contamination.

2Align the two plastic snap extensions on the sides of the M1 Processor Adapter with the slots on the sides of the Option Adapter.

The 12-pin connectors and processor extension connectors will automatically line up when the units are in this position. The two devices should be oriented so that their communication ports are facing out on the back side of the assembly.

CAUTION

PIN ALIGNMENT

Proper assembly requires that the 34 pins on the processor extension connector be aligned correctly with the mating socket on the M1 processor adapter. Do not connect one side and try to rotate the M1 onto the option adapter.

Failure to observe this precaution can result in equipment damage.

3Push the Processor Adapter onto the Option Adapter, gently pressing the locking tabs inward.

Result: The locking tabs on each side of the Processor Adapter slide inside the Option Adapter and out through the locking slot. The 12-pin and 34-pin connectors on the two units are mated to each other in the process.

Continued on next page

96

870 USE 101 10 V.2

Page 96
Image 96
Schneider Electric Processor Adapter manual Assembling an Processor Option Adapter, PIN Alignment