Configuring an M1 CPU with Concept
352 870 USE 101 10 V.2
Configuring I/O, Continued
Read Use the read function to read data from the slave to the master. The Read Ref Slave column specifies the first address to be read. The Read Count column specifies the number of registers to read. The Read Ref Master column specifies the first address to read to. Write Use the write function to write data from the master to the slave. The Write Ref Master column specifies the first address to write. The Write Count column specifies the number of registers t o write. The Write Ref Slave column spec ifies the first address to write to:
Continued on next page
OK Cancel Help
Etherner Configuration:
Specify IP Address
Use Bootp Server
Disable Ethernet
I/O Scanner Configuration:
Master Module (slot):
Health Block (1X/3X):
Slave IP Address Unit ID Health
TimeoutRep
RateRead Ref
Master Read Ref
Slave Read
Length Write Ref
Master Write Ref
Slave De
1
2
3
4
5
6
7
8
9
10
11
12
0.0.0.0
171 CCC 960 20-984
0.0.0.0
255.255.255.0
128.7.32.54
128.7.32.54
128.7.32.54
000 20
000 0
000 0
Ethernet / I/O Scanner
400001 400050
Note: For Ethernet modules, the Read Ref Slave and Write Ref Slave always start with register 400001.
OK Cancel Help
Etherner Configuration:
Specify IP Address
Use Bootp Server
Disable Ethernet
I/O Scanner Configuration:
Master Module (slot):
Health Block (1X/
Slave IP Address Unit ID Health
Timeout Rep
Rate Read
Ref Read Ref
Slave Read
LengthWrite Ref
Master Write Ref
Slave De
1
2
3
4
5
6
7
8
9
10
11
12
0.0.0.0
171 CCC 960 20-984
0.0.0.0
255.255.255.0
128.7.32.54
128.7.32.54
128.7.32.54
000 20
000 0
000 0
Ethernet / I/O Scanner
400100 400040