Configuring an M1 CPU with Modsoft
870 USE 101 10 V.2 237
Changing Parity
Introduction From the Port editor screen, a port can be configured for even, odd, or no parity
checking. The factory-set default is EVEN parity.
Procedure To change the parity parameter, perform the steps in the following table.
Step Action
1Place the cursor on the current Parity entry for the Modbus port you want to enter.
Push <Enter>.
Result: A popup window appears in the top left corner of the screen displaying your
three Parity options:
2Use an arrow key to toggle the cursor onto the desired Parity selection in the popup
window, then push <Enter>.
Result: The Port editor screen is updated with the Parity type you have specified,
and the cursor moves to the Stop Bits column.