Schneider Electric Processor Adapter manual Using Concept, Plc

Configuring an M1 CPU with Concept

Selecting an M1 Processor Adapter

Introduction This section describes how to select an M1 Processor Adapter for a new project

using Concept 2.2.

Note: For a full description of Concept, refer to the set of manuals shipped with the software.

F

Procedure	Follow the steps below to select an M1 Processor Adapter for a new project.
	Step	Action

1From the File menu, select New Project.

Result: A new project is opened and the file name [untitled] appears over the menu bar.

2From the Project menu, select Configurator.

Result: The PLC Configuration screen appears.

PLC Configuration
Type:	PLC
	Available Logic Area:
Exec Id:	Extended Memory:
Memory Size:
Ranges	Loadables
Coils:	Number installed:
Discrete Inputs:
Input Registers:
Holding Registers:
Specials	Segment Scheduler
Battery Coil:	Segments:
Timer Register:
Time of Day:
Config Extensions	ASCII
Data Protection:	Number of Messages:
Peer Cop:	Mesage Area Size:
Hot Standby:	Number of Ports:
Ethernet:
Profibus DP:

Continued on next page

870 USE 101 10 V.2 311