SYSTEM SETTINGS

Paper Type Registration

Store a paper type when the desired paper type does not appear as a selection or when you wish to create a new set of paper properties.

Up to 7 paper types can be stored.

Item

Description

 

 

Type Name

Store any name.

The factory default names are "User Type 1" - "User Type 7".

 

 

 

Fixed Paper Side

Enable this setting when paper with a front and reverse side is used.

 

 

Disable Duplex

Enable this setting when paper is loaded that cannot used for two-sided printing.

 

 

Disable Staple

Enable this setting when paper is used that cannot be stapled.

 

 

Disable Punch

Enable this setting when paper is used that cannot be punched.

 

 

The settings that can be selected vary depending on the peripheral devices installed.

Auto Tray Switching

When a tray runs out of paper during printing, this determines whether or not another tray with the same size and type of paper is automatically selected and printing continues.

Custom Size Registration (Bypass)

If you frequently use a special non-standard paper size in the bypass tray, you can store that paper size. Storing the paper size saves you the trouble of setting the size each time you need to use it.

Up to three paper sizes can be stored.

Touch the key ([Custom 1] to [Custom 3]) in which you wish to store or change a paper size. The following screen will appear:

System Settings

 

 

 

Custom Size Registration (Bypass)

 

Cancel

OK

Size Input-AB

 

Size Input-Inch

 

X

17

Inch

 

Y

11

Inch

 

Select whether you wish to enter the size in inches ("Size Input-Inch") or mm ("Size Input-AB"), and then set the X and Y dimensions of the paper.

"Size Input-Inch"

The X dimension can be set to a value from 5-1/2 " to 17". The factory default setting is 17". The Y dimension can be set to a value from 5-1/2" to 11-5/8". The factory default setting is 11".

"Size Input-AB"

The X dimension can be set to a value from 148 mm to 432 mm. The factory default setting is 432 mm. The Y dimension can be set to a value from 100 mm to 297 mm. The factory default setting is 297 mm.

7-15

Contents