Exchanging Information with a Personal Computer

Using SHARP’s optional Organizer Link software and cable package or certain third-party software packages, you can exchange data with a personal computer. Certain software will allow you to exchange data with a personal computer via the Organizer’s infrared port using the optional CE-IR2 wireless interface. This makes it possible, for example, to use the unit when outside your home or office, then later transfer the data you have entered on the Organizer to your desktop computer.

To setup the Organizer for use with the Organizer Link:

1.Make sure the unit is turned off.

2.For infrared transfer, set up the Organizer with the CE-IR2 wireless interface. (See the CE-IR2 manual for details.)

For a cable transfer, connect the Organizer Link cable to the Organizer’s 15-pin cable jack. (See the Organizer Link manual for details.)

3.Press ON .

4.Press MENU four times to display the PERIPHERALS menu.

5.Select PC-LINK and press ENTER .

The SELECT PC-LINK PATH window appears.

You can also press 2nd MENU to access the PC- LINK.

6.Select IR for infrared transfer or DIRECT CABLE for cable transfer and press ENTER .

#9-3-1 Display

Your Organizer is now ready to transfer data. Consult the Organizer Link manual regarding subsequent transfer procedures.

Press ON at any time to exit the PC Link mode.

If you leave the Organizer in PC Link mode, more power is consumed from the batteries than usual, and the auto power off function does not work.

To conserve battery power, always press ON to leave the PC Link mode as soon as you have finished transferring data.

180

Page 182
Image 182
Sharp OZ-5500 operation manual Exchanging Information with a Personal Computer, 180