5.Select the desired city.

6.If Daylight Saving Time (DST) is observed by the

selected city, press to indicate this.

A symbol appears beside the city, indicating that DST has been set.

7.Press ENTER .

The city is selected as the World city and the window closes.

The Clock window briefly appears, indicating the time in the selected World city. The time difference relative to the Local city is displayed below the World city time.

While selecting a city from the list, you can press

SPACE at any time to return to the first page of the list.

Adding a User-defined city

Since some cities you may wish to use might not appear in the Organizer’s built-in pre-defined list of cities, the Clock application lets you define your own cities, called User cities, for use as the Local and World cities.

1.Press MENU to open the Clock menu.

2.Select SET CLOCK and press ENTER .

3.Select ADD USER’S CITY and press ENTER .

The ADD USER’S CITY window opens.

#6-2-6 Display

You can set up to three cities by entering information in the three fields. In the unit’s default settings, New York has been designated as USER CITY1.

4.Move to the field you would like to change for USER CITY1, 2, or 3.

5.Press NEW to delete the current name and enter the name of your desired city.

6.Move to the COUNTRY field.

7.Delete the current setting and enter the name of the country where the city is located.

8.Move to the GMT (Greenwich Mean Time) field.

9.Enter the time difference between the user city and Greenwich Mean Time (the international time

reference). Press before a number to indicate a negative time difference (ie. the time in the selected city is earlier than GMT). You can specify any value from –11.5 to +12 to the nearest half-hour.

10. Press ENTER .

6

129

Page 131
Image 131
Sharp OZ-5500 operation manual Adding a User-defined city, 129