![](/images/new-backgrounds/1262980/262980107x1.webp)
Parameters
2.1.6. Acknowledge Fault
This is required only for faults listed as requiring a manual reset in the General Fault Code list (see page 80).
To acknowledge via SIMATIC PDM see Reset Fault on page 47.
To acknowledge via the handheld programmer, key in the value of the fault code in question. The fault code will disappear.
2.1.7. Menu Timer
Determines the length of time (in seconds) the device will stay in PROGRAM mode without any key presses occurring.
2.1.8. Backlight
Controls the setting for the LCD backlight feature.
Handheld | 0 |
| Backlight off | |
|
|
| ||
1 |
| Backlight on | ||
programmer |
| |||
|
|
| ||
|
| Backlight remains illuminated for 3 minutes from last key | ||
Values | 2 | * | ||
press. | ||||
|
|
| ||
|
|
|
|
2.2.Device
Manufacturer
References a specific manufacturer, usually the name of the company responsible for the manufacture of this Field Device.
Product designation
Uniquely identifies the Field Device when combined with the Manufacturer Identification and Device Type.This variable cannot be modified by the Host user.
Device Serial Num
Uniquely identifies the Field Device. This variable cannot be modified by the Host.
Order No.
The order number for this device.
Date of birth
Date of manufacture.
2.2.1. Software Revision
Corresponds to the software or firmware that is embedded in the Field Device.
2.2.2. Hardware Revision
Corresponds to the electronics hardware of the Field Device.
Profile Revision (PROFIBUS devices only)
PROFIBUS PA Profile standard that this device conforms to.
Static Revision No. (PROFIBUS PA devices only)
The revision level of the static data associated with the Physical Block.The Static Revision No. is updated whenever a standard profile configuration parameter is changed.
Page 48 | SITRANS LR 460 – INSTRUCTION MANUAL | 7ML19985JM01 |