Parameters
6. Maintenance settings
Use these parameters to set up schedules for calibration and maintenance. The device will track itself based on operating hours, instead of a
The maintenance warnings and alarms are communicated to the end user through either the status or condensed status bytes. This information can be integrated into any Asset Management system.For optimal use, we recommend that you use SIMATIC PCS7 Asset Management Software in conjunction with SIMATIC PDM.
6.1. Remaining Device Lifetime
The device tries to predict its overall lifetime. A factory default can be reset by the user.
6.1.1.Total Device Operating Time
6.1.2.Remaining Device Lifetime
6.1.3.Maintenance Required Limit
6.1.4.Maintenance Demanded Limit
6.1.5.Maintenance Alert Activation
6.1.6.Total Expected Device Life
6.1.7.Maintenance Status
6.1.8.Acknowledge Status
6.1.9.Acknowledge
6.2.Remaining Sensor Lifetime
The device monitors the predicted lifetime of the sensor (the components exposed to the vessel environment). A factory default can be reset by the user.
6.2.1.Total Sensor Operating Time
6.2.2.Remaining Sensor Lifetime
6.2.3.Maintenance Required Limit
6.2.4.Maintenance Demanded Limit
6.2.5.Maintenance Alert Activation
Page 68 | SITRANS LR 460 – INSTRUCTION MANUAL | 7ML19985JM01 |
