mmmmm Wirng

4.

Thermal Data for 7ML5426 Series

 

 

 

 

 

 

 

 

Device

Permitted ambient

Permitted ambient

 

 

temperature at electronic

 

 

category

temperature at horn antenna

 

 

enclosure

 

 

 

 

 

 

 

 

 

 

 

1D, 1/2D, 2D

–40 °C (–40 °F) Tamb +200°C

–40 °C (–40 °F) Tamb +65°C

 

 

(+392 °F)

(+149 °F)

 

 

 

 

 

 

 

 

5.

The equipment has not been assessed as a safety related device (as referred to by

 

 

Directive 94/9/EC Annex II, clause 1.5).

 

6.

Installation and inspection of this equipment shall be carried out by suitably trained

 

 

personnel in accordance with the applicable code of practice (EN 61241-14 and EN

 

 

61241 –17 in Europe).

 

7.

Repair of this equipment shall be carried out by suitably trained personnel in

 

 

accordance with the applicable code of practice.

 

8.

Components to be incorporated into or used as replacements in the equipment shall

 

 

be fitted by suitably trained personnel in accordance with the manufacturer’s

 

 

documentation.

 

9.

It is the user’s responsibility to ensure that a manual override is possible in order to

 

 

shut down the equipment, and that protective systems are incorporated within

automatic processes which deviate from the intended operating conditions, provided that this does not compromise safety.

10. Equipment Marking: The equipment marking contains at least the information on the product label. See Product Nameplate on page 23.

11. If the equipment is likely to come into contact with aggressive substances, it is the user’s responsibility to take suitable precautions to prevent it from being adversely affected, and to ensure that the type of protection is not compromised.

• Aggressive substances include, for example, acidic liquids or gases that may attack metals, or solvents that may affect polymeric materials.

• Suitable precautions include, for example, regular checks as part of routine inspections, or establishing from the material’s data sheet that it is resistant to specific chemicals.

SPECIAL CONDITIONS FOR SAFE USE

The ‘X’ suffix to the certificate number relates to the following special condition(s) for safe use.

Cable or conduit entries must meet the requirements of European Directive 94/9/EC for Group II, Category 1D, 1/2D, or 2D, as appropriate, and must maintain the overall IP rating of the enclosure.

For applications that require the purge feature, the user shall implement a means to ensure that combustible dust from the hazardous area cannot enter the purge supply in such a way as to compromise the area classification.

Page 24

SITRANS LR 460 – INSTRUCTION MANUAL

7ML19985JM01

Page 30
Image 30
Siemens LR 460 Device Permitted ambient, Thermal Data for 7ML5426 Series, Directive 94/9/EC Annex II, clause