Appendix D: Local Operation Interface
The LCD Display
Note: SITRANS LR 460 continues to monitor In and Out values even when the device is in PROGRAM mode.
RUN mode (startup display)
Normal operation
1 | 2 | 3 |
5 |
| 4 |
98.82 m | 5 | |
3.800 mA |
| |
LOE condition
1 | 2 | 3 |
4
98.82 m 
S: 0
1 – Primary display: level, space, or distance
2 – Units: for Primary Value (m, cm, mm, ft, in, or percent) if applicable
3 – Echo status indicator:
Reliable Echo: |
|
|
| visible during normal operation. |
|
|
| ||
|
|
| ||
|
|
|
|
|
Unreliable Echo: 
If LOE is pending1 the x flashes, alternating with the two horizontal bars.
When LOE becomes active, the x becomes solid and the auxiliary display shows fault code S: 0.
4 – Heartbeat: a small
5 – Auxiliary display2: distance, mA value (HART only), confidence, or temperature.
PROGRAM Mode Display | 1 | ||
|
| ||
1 | – Menu level |
| |
2 | – Parameter name |
| |
3 | – Edit Mode indicator/PROGRAM icon | 4 | |
4 | – Value of current parameter | ||
| |||
23
1.3.1 SOFT REV 0.01.18
D: Local Interface
1.See LOE Timer on page 74 for details.
2.Appears in response to request via Siemens Milltronics handheld programmer
7ML19985JM01 | SITRANS LR 460 (HART) – INSTRUCTION MANUAL | Page |
