Texas Instruments MSP50C614 manual Example 4.14.28.13 MOV R1, 0x0200, Transfer R5 to R0 Example

Individual Instruction Descriptions

Example 4.14.28.13 MOV R1, 0x0200 * 2

Load immediate word memory address 0x0200 to R1.

Example 4.14.28.14 MOV R7, (0x0280 ± 32) * 2

Load R7 (stack register) with the starting value of stack, i.e., 0x0260.

Example 4.14.28.15 MOV *0x0200 * 2, R0

Store R0 to data memory word location 0x0200.

Example 4.14.28.16	MOV	R0, R5
Transfer R5 to R0.
Example 4.14.28.17	MOV	AP2, *R3

Copy content of data memory location stored in R3 to accumulator pointer AP2.

Example 4.14.28.18 MOV *R6 + 8 * 2, DP

Copy data pointer (DP) to data memory word location pointed by R6 offset by 8 location (short relative addressing).

Example 4.14.28.19 MOV STR, *0x0200 * 2

Copy the STR register with the content of word memory location 0x0200.

Example 4.14.28.20 MOV *R6+0x20, TF2

Copy TF2 flag to the flag bit in relative flag location R6 offset by 0x20.

Example 4.14.28.21 MOV TF1, ZF

Copy status of ZF flag in STAT register to TF1.

Example 4.14.28.22 MOV SV, 4 ± 2

Load SV register with a constant value 2.

Example 4.14.28.23 MOV AP3, 23 ± 16

Load accumulator pointer AP3 with value 7.

Assembly Language Instructions 4-119