Texas Instruments MSP50C614 manual Shltpls Shift Left String and Transfer PL to Accumulator

Individual Instruction Descriptions

4.14.74 SHLTPLS							Shift Left String and Transfer PL to Accumulator
Syntax
	[label]	name			dest, src								Clock, clk				Word, w			With RPT, clk					Class
		SHLTPLS			An, {adrs}										Table 4±46					Table 4±46						1b
		SHLTPLS			An[~], An[~]									nS+3				1				nR+3				3
Execution			PH, PL ⇐ src << SV
			dest ⇐			PL
			PC ⇐ PC + 1
Flags Affected			OF, SF, ZF, CF are set accordingly
			src is {adrs}:								TAG bit is set accordingly
Opcode
Instructions				16			15	14	13	12		11	10	9		8	7	6	5	4		3	2	1			0
SHLTPLS An, {adrs}				0			1	1	1	0		0	1		An						adrs
					x				dma16 (for direct) or offset16 (long relative) [see section 4.13]
SHLTPLS An[~], An[~]				1			1	1	0	0		1	1		An		1	1	0	1		0	0	A~			~A
Description			Shift left accumulator string or data memory string pointed at by {adrs} by nSV
			bits (as specified by the SV register). The result is zero-filled on the right and
			either zero-filled or sign-extended on the left (based on the setting of the
			Extended Sign Mode (XM) bit in the status register). The upper 16 bits are
			latched into the PH register. The result is transferred to the destination
			accumulator (or its offset). This instruction propagates the shifted bits to the
			next accumulator, including one accumulator past the string length (which
			receives the same data as PH).
Syntax							Description
SHLTPLS An, {adrs}							Shift data memory string left, transfer result to An
SHLTPLS An[~], An[~]							Shift An[~] string left, transfer result to An[~]
See Also			SHLTPL, SHLAPL, SHLAPLS, SHLSPL, SHLSPLS

Example 4.14.74.1 SHLTPLS A0, *R4++R5

Shift the string pointed by the byte address stored in R4 by nSV bits to the left, and store the result in accumulator string A0. Add R5 to R4 and store result in R4. After execution of the instruction, PH is copied to the next to the last accumulator of the string.

Example 4.14.74.2 SHLTPLS A2, *R1++

Shift the string pointed by the byte address stored in R1 by nSV bits to the left, and store the result in accumulator string A0. Increment R1 (by 2) at each execution to get the next memory value.

Example 4.14.74.3 SHLTPLS A1, A1

Shift the accumulator string A1 by nSV bits to the left.

Assembly Language Instructions 4-169