Texas Instruments TMS320C674X manual Receive DMA Overruns Register RXDMAOVERRUNS

Models: TMS320C674X

1 136
Download 136 pages 20.2 Kb
Page 132
Image 132
5.50.36 Receive DMA Overruns Register (RXDMAOVERRUNS)

EMAC Module Registers

www.ti.com

5.50.34 Receive FIFO or DMA Start of Frame Overruns Register (RXSOFOVERRUNS)

The total number of frames received on the EMAC that had either a FIFO or DMA start of frame (SOF) overrun. An SOF overrun frame is defined as having all of the following:

Was any data or MAC control frame that matched a unicast, broadcast, or multicast address, or matched due to promiscuous mode

Was of any size (including less than 64-byte and greater than RXMAXLEN-byte frames)

The EMAC was unable to receive it because it did not have the resources to receive it (cell FIFO full or no DMA buffer available at the start of the frame).

CRC errors, alignment errors, and code errors have no effect on this statistic.

5.50.35 Receive FIFO or DMA Middle of Frame Overruns Register (RXMOFOVERRUNS)

The total number of frames received on the EMAC that had either a FIFO or DMA middle of frame (MOF) overrun. An MOF overrun frame is defined as having all of the following:

Was any data or MAC control frame that matched a unicast, broadcast, or multicast address, or matched due to promiscuous mode

Was of any size (including less than 64-byte and greater than RXMAXLEN-byte frames)

The EMAC was unable to receive it because it did not have the resources to receive it (cell FIFO full or no DMA buffer available after the frame was successfully started - no SOF overrun).

CRC errors, alignment errors, and code errors have no effect on this statistic.

5.50.36 Receive DMA Overruns Register (RXDMAOVERRUNS)

The total number of frames received on the EMAC that had either a DMA start of frame (SOF) overrun or a DMA middle of frame (MOF) overrun. A receive DMA overrun frame is defined as having all of the following:

Was any data or MAC control frame that matched a unicast, broadcast, or multicast address, or matched due to promiscuous mode

Was of any size (including less than 64-byte and greater than RXMAXLEN-byte frames)

The EMAC was unable to receive it because it did not have the DMA buffer resources to receive it (zero head descriptor pointer at the start or during the middle of the frame reception).

CRC errors, alignment errors, and code errors have no effect on this statistic.

132

EMAC/MDIO Module

SPRUFL5B –April 2011

 

 

Submit Documentation Feedback

© 2011, Texas Instruments Incorporated

Page 132
Image 132
Texas Instruments TMS320C674X manual Receive DMA Overruns Register RXDMAOVERRUNS