Texas Instruments TMS320C674X manual Receive QOS Filtered Frames Register RXQOSFILTERED

www.ti.com EMAC Module Registers

To determine the number of receive frames discarded by the EMAC for any reason, sum the following statistics (promiscuous mode disabled):

•Receive fragments

•Receive undersized frames

•Receive CRC errors

•Receive alignment/code errors

•Receive jabbers

•Receive overruns

•Receive filtered frames

This may not be an exact count because the receive overruns statistic is independent of the other statistics, so if an overrun occurs at the same time as one of the other discard reasons, then the above sum double-counts that frame.

5.50.12 Receive QOS Filtered Frames Register (RXQOSFILTERED)

The total number of frames received on the EMAC that were filtered due to receive quality of service (QOS) filtering. Such a frame is defined as having all of the following:

•Any data or MAC control frame that matched a unicast, broadcast, or multicast address, or matched due to promiscuous mode

•The frame destination channel flow control threshold register (RXnFLOWTHRESH) value was greater than or equal to the channel'scorresponding free buffer register (RXnFREEBUFFER) value

•Was of length 64 to RXMAXLEN

•RXQOSEN bit is set in RXMBPENABLE

•Had no CRC error, alignment error, or code error

See Section 2.5.5 for definitions of alignment, code, and CRC errors. Overruns have no effect on this statistic.

5.50.13 Receive Octet Frames Register (RXOCTETS)

The total number of bytes in all good frames received on the EMAC. A good frame is defined as having all of the following:

•Any data or MAC control frame that matched a unicast, broadcast, or multicast address, or matched due to promiscuous mode

•Was of length 64 to RXMAXLEN bytes inclusive

•Had no CRC error, alignment error, or code error

See Section 2.5.5 for definitions of alignment, code, and CRC errors. Overruns have no effect on this statistic.

5.50.14 Good Transmit Frames Register (TXGOODFRAMES)

The total number of good frames transmitted on the EMAC. A good frame is defined as having all of the following:

•Any data or MAC control frame that was destined for any unicast, broadcast, or multicast address

•Was any length

•Had no late or excessive collisions, no carrier loss, and no underrun

SPRUFL5B –April 2011	EMAC/MDIO Module	127
Submit Documentation Feedback

© 2011, Texas Instruments Incorporated