ZyXEL Communications IES-1000 LABEL, Speed, Duplex, DESCRIPTION, Table 11-2ADSL Port Setup, Figure 11-1ADSL Port Setup

IES-1000 User’s Guide

		Figure 11-1 ADSL Port Setup
The following table describes this screen.
		Table 11-2 ADSL Port Setup
	LABEL	DESCRIPTION
	Profile Setup	Click this link to go to a screen for setting up DSL profiles.
	Port Number	This field shows “0” for the Ethernet port.
	Active	This field shows whether or not this port is enabled (the Ethernet port is always enabled).
	Name	This field displays the port’s descriptive name if one has been configured.
	Auto-Neg	This field shows whether auto-negotiation is turned on (Yes) or not (No). The Speed and
		Duplex fields display N/A when the auto-negotiation is turned on.
	Speed	This is the speed of the Ethernet connection.
	Duplex	The duplex mode can be half (meaning traffic is transmitted in one direction at a time) or full
		(meaning traffic is simultaneously transmitted in both directions).
	Port Number	This field identifies the port's index number.
	Active	This field shows whether the port is turned on (Yes) or not (No). The factory default of all ADSL
		ports is disabled. A port must be enabled for data transmission to occur.
	Profile	This field shows which profile is assigned to this port.
	Mode	This field shows to which ADSL operational mode the port is set.
	UpStream	This field shows the maximum upstream speed that is configured for this port.
	Rate (Kbps)
	DownStream	This field shows the maximum downstream speed that is configured for this port.
	Rate (Kbps)
	Channels	This field displays the number of PVCs (Permanent Virtual Circuits) that are configured for this
		port.

11-4 ADSL Module Port Setup